- Data Sheet: C1-15
θ THETA - PTFE LAB / Tubi Parete Sottile in PTFE
|
Caratteristiche Settori |
| Influenza della temperatura sulla resistenza alla pressione | |
|---|---|
| T(°C) | P(%) |
| 23° | 100 |
| 50° | 85 |
| 100° | 65 |
| 150° | 50 |
| 200° | 35 |
| ID mm |
OD mm |
Peso (Kg/m) |
Pressione scoppio (MPa a 23°C) |
Raggio curvatura (mm) |
|---|---|---|---|---|
| 1,5 | 3,2 | 0,012 | 110 | 12,0 |
| 1,5 | 3,5 | 0,017 | 125 | 12,0 |
| 2,0 | 3,0 | 0,009 | 70 | 18,0 |
| 2,0 | 4,0 | 0,020 | 110 | 16,0 |
| 2,5 | 3,5 | 0,010 | 55 | 25,0 |
| 2,5 | 4,0 | 0,017 | 80 | 18,0 |
| 2,5 | 5,0 | 0,032 | 110 | 20,0 |
| 3,0 | 4,0 | 0,012 | 50 | 32,0 |
| 3,0 | 5,0 | 0,027 | 85 | 25,0 |
| 3,0 | 6,0 | 0,046 | 110 | 24,0 |
| 4,0 | 5,0 | 0,015 | 40 | 50,0 |
| 4,0 | 6,0 | 0,034 | 70 | 36,0 |
| 4,0 | 7,0 | 0,056 | 90 | 33,0 |
| 4,0 | 8,0 | 0,081 | 110 | 32,0 |
| 4,5 | 6,5 | 0,037 | 60 | 41,0 |
| 5,0 | 6,0 | 0,018 | 30 | 50,0 |
| 5,0 | 7,0 | 0,041 | 60 | 49,0 |
| 5,0 | 8,0 | 0,066 | 80 | 43,0 |
| 5,0 | 9,0 | 0,055 | 95 | 41,0 |
| 6,0 | 7,0 | 0,022 | 25 | 98,0 |
| 6,0 | 8,0 | 0,048 | 50 | 64,0 |
| 6,0 | 9,0 | 0,076 | 70 | 54,0 |
| 6,0 | 10,0 | 0,109 | 85 | 50,0 |
| 6,5 | 9,5 | 0,081 | 65 | 60,0 |
| 7,0 | 9,0 | 0,054 | 40 | 81,0 |
| 7,0 | 10,0 | 0,087 | 60 | 67,0 |
| 7,5 | 9,5 | 0,058 | 40 | 90,0 |
| 8,0 | 9,0 | 0,029 | 20 | 162,0 |
| 8,0 | 10,0 | 0,061 | 40 | 100,0 |
| 8,0 | 12,0 | 0,136 | 70 | 72,0 |
| 9,0 | 10,0 | 0,032 | 15 | 205,0 |
| 9,0 | 11,0 | 0,068 | 35 | 120,0 |
| 9,0 | 12,0 | 0,107 | 50 | 85,0 |
| 10,0 | 11,0 | 0,036 | 15 | 242,0 |
| 10,0 | 12,0 | 0,075 | 30 | 144,0 |
| 10,0 | 13,0 | 0,116 | 45 | 113,0 |
| 10,0 | 14,0 | 0,162 | 55 | 98,0 |
| 11,0 | 13,0 | 0,081 | 30 | 145,0 |
| 12,0 | 14,0 | 0,878 | 25 | 196,0 |
| 13,0 | 15,0 | 0,095 | 25 | 225,0 |
| 14,0 | 16,0 | 0,101 | 20 | 256,0 |
| 15,0 | 17,0 | 0,108 | 20 | 289,0 |
| 15,0 | 18,0 | 0,167 | 30 | 216,0 |
| 16,0 | 18,0 | 0,115 | 20 | 324,0 |
| 16,5 | 19,5 | 0,182 | 30 | 254,0 |
| 17,0 | 20,0 | 0,187 | 25 | 267,0 |
| 18,0 | 20,0 | 0,128 | 15 | 400,0 |
| 18,0 | 22,0 | 0,270 | 30 | 242,0 |
| 19,0 | 22,0 | 0,208 | 20 | 323,0 |
| 20,0 | 22,0 | 0,142 | 15 | 325,0 |
| 20,0 | 24,0 | 0,297 | 25 | 288,0 |
| 21,0 | 24,0 | 0,228 | 20 | 384,0 |
| 22,0 | 24,0 | 0,155 | 15 | 576,0 |
| 24,0 | 27,0 | 0,258 | 20 | 486,0 |
| 24,5 | 27,0 | 0,217 | 15 | 583,0 |
| 25,0 | 28,0 | 0,268 | 15 | 523,0 |
| Diametri / Diameter (mm) |
Tolleranze / Tolerance (mm) |
|---|---|
| 1,5 < d ≤ 5 | ± 0,10 |
| 5,1 < d ≤ 7 | ± 0,15 |
| 7,1 < d ≤ 10 | ± 0,20 |
| 10,1 < d ≤ 15 | ± 0,30 |
| 15,1 < d ≤ 20 | ± 0,40 |
| 20,1 < d ≤ 30 | ± 0,60 |
| Spessore parete Wall thickness (mm) |
Massimo decentramento Maximum excentration tolerance (mm) |
|---|---|
| 0,5 | 0,1 |
| 1 | 0,15 |
| 1,5 | 0,17 |
| 2 | 0,2 |
| 2,5 | 0,25 |
| 3 | 0,3 |
| Caratteristiche | Unità di misura | Metodi prova (ASTM) | PTFE | PFA |
|---|---|---|---|---|
| Fisiche | ||||
| Peso specifico | gr/cm3 | D792 | 2,16 | 2,15 |
| Aspetto | Bianco Traslucido | Trasparente | ||
| Assorbimento d’acqua | % | D570 | <0,01 | <0,03 |
| Meccaniche | ||||
| Carico di rottura a trazione | Kgf/cm2 | D638 D1708 |
250-300 | 280 |
| Allungamento a rottura | % | D638 | 250-400 | 300 |
| Modulo di elasticità | MPa | D747 | 440 a520 | 650 |
| Durezza | Shore D | D2240 | 55-65 | 60-65 |
| Termiche | ||||
| Punto di fusione | °C | +327° | +310° | |
| Temperatura d’esercizio massima | °C | +260° | +260° | |
| Temperatura d’esercizio minima | °C | -60° | -60° | |
| Elettriche | ||||
| Rigidità elettrica | KV/mm | D149 | 80 | 80 |
| Fattore di dissipazione | 0,0003 | 0,00075 | ||
| Chimiche | ||||
| Resistenza chimica | Eccellente | Eccellente | ||
| Resistenza alla corrosione atmosferica | Eccellente | Eccellente | ||
